Knowledge base · Service-King
Fixed asset stocktaking and depreciation
A fixed asset has value in the books, but it is also a specific item in the company. The inventory helps connect the two pictures: determining what actually exists, where it is located and which discrepancies require decisions.

What to prepare in the asset register
Compare specifications, ID and site assignment before stocktake. The asset number and RFID are related information, but they do not have to be the same number. For similar items, it is worth keeping the serial number or another means of additional verification.
Separate physical condition from book value. A fully depreciated machine may still be in operation and require records. In turn, the presence of a record in the books is not proof that the item is still in the assigned room.
| Area | What to verify |
|---|---|
| Identity | Whether the file describes the correct item, without duplicates. |
| Assignment | Location, responsible person and latest traffic document. |
| Value | Linking to the accounting data of the correct component. |
| Designation | Whether the tag and print are legible and correctly assigned. |
Physical and accounting records should identify the same asset
The most difficult differences arise when the warehouse knows the equipment by its common name, accounting by the fixed asset number, and the user by the serial number. There is no need to replace these designations with one new number before the stocktake. They need to be linked correctly. The record should make it possible to recognize the item regardless of the method of retrieval. Then the UHF or QR reading leads to the correct position and the export retains the number used by accounting.
Check especially kits, upgrades and similar devices. One accounting item may require a different way of being physically described than a single laptop. Agree on the rules before marking. Otherwise, the team will count the items correctly but will not know how to assign the result to the records. This determination is part of data preparation, not a problem that greater reader coverage will solve.
How to link stocktaking with depreciation and documents
In Service-King, depreciation data can be assigned to an individual asset identified by UHF or QR. Initial value, KŚT classification code, start date, method and rate provide the basis for calculations. When continuing existing records, accumulated depreciation must also be taken into account. Fully depreciated equipment can still be used and physically inspected. Zero book value does not mean that the item has ceased to exist.
The depreciation schedule and report answer a different question from the stocktake. They show depreciation charges and remaining value, while the stocktake establishes physical existence and discrepancies. OT, MT and LT documents and exported reports link these perspectives with subsequent accounting work. Calculating depreciation in the application does not automatically post it to an external accounting system. More details are available in stocktaking and depreciation in Service-King.
Agree the method and due dates with accounting
Polish accounting law provides different stocktaking methods for different assets. Not every fixed asset is checked in the same way or on the same date. Agree how to handle inaccessible assets, items off site and exceptions before the check. Local rules apply outside Poland.
In Poland, the legal basis is Articles 26–27 of the Polish Accounting Act. The guide to stocktaking methods explains practical differences.
How Service-King helps
UHF or QR reading leads to a specific asset. You compare the stocktake result with the records and explain the shortage, surplus or misattribution. In Service-King, you can also associate the component with depreciation data and prepare its schedule and reports. Calculating the write-off does not mean posting it in the external ERP.
Data to be exported must have agreed scope and identifiers. The functions of inventory, depreciation and preparation of data for accounting are described on the website RFID stocktaking in Service-King.
Spreadsheets, QR and UHF: what changes during a stocktake
| Way | When it helps | What still needs to be done |
|---|---|---|
| Sheet and manual identification | Small scope, well described things. | Identify the item, enter the result and explain the discrepancy. |
| QR or barcode | Intentional indication of a single piece. | Access the code and confirm the correct item. |
| RFID UHF | Many marked items and harder to find labels. | Match markings, limit adjacent zone readings, and check for exceptions. |
| Document control | Assets subject to the appropriate document-verification method. | Agree the method, documentation and settlement with accounting. |
The choice of technology does not replace the choice of the appropriate inventory method. The team should know which items they are physically checking, which ones require confirmation, and how to document exceptions.
Example workflow: equipment across three branches
The coordinator prepares a shared asset list and allocates tasks by branch. Teams use the same location names and rules for describing discrepancies. A laptop checked out to a remote employee follows a separate verification procedure; it is not automatically treated as lost simply because it was not read in the office. A device found at another branch retains its item record, and any reassignment requires investigation.
After the inspection, it is worth separating the time of reading itself from the time of preparation and explanation. Only the sum shows the team's load. Maintain scope, date, people and approved corrections in the report. The next time you take inventory, you will use the corrected data instead of starting from the old sheet. If you operate seasonally, discuss the scope of access and data retention between operations during preparation of implementation.
Scenario: the item is physically present, but the records do not match
The team finds a device with the correct name, but the number on the list does not match the designation. You should not immediately add a new asset or consider an expected item missing. First, compare the serial number, documents and associated identifiers. It is possible that the label was replaced, the description was shortened, or the wrong fields were combined during import. Identity recognition precedes assignment correction. It is worth handling such a case in a separate queue of explanations so as not to detain the entire stocktake team.
After determining the item, check whether the correction applies only to auxiliary data, location or relationship to the accounting item. The scope of approval may vary. Record the source of confirmation and the person making the decision. This will ensure that the next audit does not reproduce the same ambiguity. If a tag has been changed, retire the old tag from current use according to established rules and preserve the history of the relevant item.
The stocktake results should distinguish confirmed items, corrected items and unresolved cases. Do not hide an unresolved case under a general "matched" status just to close the list. Accounting also needs to know the date to which the findings relate and which movements occurred afterwards. Agreed documentation connects physical findings with subsequent reconciliation without reconstructing the entire discussion manually.
| Area | Practical arrangement |
|---|---|
| Identity | What number or document confirmed the correct item. |
| Designation | Whether the tag remains or has been replaced. |
| record | Which fields really needed improvement. |
| Accounting | Whether additional linkage arrangements are needed. |
| Responsibility | Who approved the correction and on what basis. |
| Next list | How to prevent the same confusion from happening again. |
Checklist for completing the checks
- Verified items unavailable and equipment issued outside the company.
- Clarified differences with documents and responsible person.
- Recorded notes about damage and missing markings.
- Result approved and adjustments agreed.
- Submitted statement for accounting with scope and date.
Go to full annual checklist.
Questions worth clarifying before implementation
Does RFID settle accounting differences?
RFID provides identification of tagged items. The result requires comparison with the records, explanation and approval in accordance with the adopted principles. The system helps prepare data and documents, but decisions regarding the recognition of differences remain in the appropriate accounting process.
Do I need to re-mark my entire property?
First, it is worth checking the existing identifiers, their format and status. Some of the markings may remain useful. For UHF you need compatible tags, but you can keep the secondary QR or number. It is crucial to assign both methods of identification to the same item.
What does the implementation time depend on?
From data quality, number of locations, type of space and scope of integration. Importing the correct file may be easier than removing duplicates and identifying missing numbers. Therefore, before the stocktake, it is worth performing a test on a representative part of the equipment.
Go to solutions related to this topic
- RFID stocktaking — Physical inventory and comparison of the reading with the records.
- Property records - Records of company equipment and fixed assets.
- Reports and movement history - Statements and documents related to operations.
- The implementation process - Process analysis, markings, tests and assembly commissioning.
Sources and further verification
Free consultation
Let's plan your asset stocktake.
Describe the number of fixed assets, locations and the program from which you want to transfer data. We will determine the method of marking, listing and preparing reports.
Thank you for your inquiry.
Your message has been sent to the correct department. We will contact you to determine next steps.
Send another inquiry