Skip to content
Service-King

Knowledge baseTools

RFID tool tagging: on-metal tags, mounting and read tests

A good marking is small, durable and legible in real conditions. The choice starts with the surface of the tool and the method of use - only then with the price and size of the tag.

Prepared by: Service-King teamPublished: Updated:

Power tool with a permanent RFID tag.
Topic illustration · Service-King

First, decide what the tag identifies

One identifier should lead to one correct record. Tools issued to employees usually refer to a specific item, not the model itself. Two identical power screwdrivers may have different condition, inspection date and rental history.

Also separate the suitcase from its contents. Reading the tag on the suitcase confirms the suitcase's identification. It does not in itself constitute proof that all batteries, terminals and devices are inside. For sets, determine which elements you mark individually and which you check against a list.

Which tag suits which surface?

Selecting the marking for the tool
Item/AreaWhat to considerWhat to check
Metal body, key, deviceOn-metal tag, e.g. PCB or appropriate metal tag.Read after mounting, impacts and available space.
Plastic housingLabel or tag matched to the material and structure of the device.Distance from metal parts inside the housing.
Tool caseDurable label or encapsulated tag.Abrasion, washing and clear connection with the set.
Small work itemThe smallest structure meeting the test conditions.That assembly does not change the grip, geometry or operational safety.

Manufacturers' materials clearly distinguish between universal and specialized markings, including on-metal: RFID tag selection by Zebra. A regular paper antenna tag does not become a metal tag when glued more firmly.

60 × 25, 30 × 15 and 45 × 18 mm: size is just the starting point

On-metal labels in formats can be selected for appropriate metal surfaces 60 × 25 mm or 30 × 15 mm. A larger surface area gives you other options for antenna design, but it doesn't allow you to promise a single range for every tool. A smaller tag may fit more easily on the case.

Label 45 × 18 mm is an example of a compact surface marking suitable for a specific model. Narrow structures 70 × 10 mm also come as fabric tags - they should not be used interchangeably with a utility tag just due to size.

Sample products can be viewed in RFID Store. We confirm the selection based on the surface, installation location and required working conditions, and not on the catalog photo alone.

Sample RFID tag formats for equipment and tools.
Different marking structures play different roles. The size does not determine resistance or suitability on metal.

Where to mount a tag so it does not get in the way

  • Choose a surface that is as flat and stable as possible.
  • Avoid places of grip, friction, impact and contact with moving parts.
  • Do not cover nameplate, ventilation openings or safety markings.
  • Prepare the surface according to the glue and tag instructions.
  • Check whether cleaning agents, oils and temperatures are within the declared parameters.
  • Do not drill the housing or alter the design of the device without proper assessment and approval of the manufacturer.

Not every PCB tag is designed to be screwed anywhere. Mounting holes do not mean that you can safely drill through the power tool. Where space is limited, a different marking model or packaging marking with separate content control may be better.

Test the installed tag, as well as testing it on the desk

  • Prepare sample. Several different pieces and typical mounting locations.
  • Check a single reading from the directions from which the operator is actually working.
  • Arrange the tools in the case, shelf and set as during the shift.
  • Check for missing reads and unwanted reads for adjacent items.
  • Retry after period of use and cleaning.
  • Save the adopted tag model and mounting location for subsequent items.

What to do after replacing a damaged label

Find an existing record, verify the number or other data and assign a new ID. Keep the history of the same item instead of creating a second asset. Withdraw the previous marking from current use in a manner consistent with the adopted records.

A clear QR or support number is useful when the operator does not have a UHF reader or the tag has stopped responding. See the comparison RFID and barcodes.

The tag should lead to a useful item history

In Service-King, a marked item can be associated with issue, return, responsible person and documents. The tag helps you recognize it. Status and forwarding information is recorded by the appropriate operation.

If you are preparing a tool crib, start with one group of equipment and check the entire flow. An example scenario is described check-outs and returns in the tool crib and page Tool Control.

Sources and further verification

Back to the knowledge base

Continue on this topic

From guidance to action.

All knowledge-base articles

If you are looking for just tags or devices, you can also see RFID tags for tools in the RFID Store .

Website language

Choose a language.